Heavy Duty Automatic Door Bottom Seal – Satin Anodised Aluminium

Seals designed to fill the gap between the bottom of a door and the floor underneath are referred to as door bottom seals.

Automatic door bottom seals are mechanically spring loaded seals that lift clear of the floor as the door opens and seal tight when the door is closed. Some automatic door bottom seals are face mounted whilst other models are fully concealed. They operate over uneven floor surfaces and can be used with threshold plates that offer added protection against rain infiltration where doorways may be exposed to severe weather conditions.

Most door bottom seals are easily adjusted after installation without removing the door. This ensures an optimum seal is achieved and maximum performance is maintained in the event of minor building movement.

This seal is spring loaded to lift clear of the floor when the door is opened. It is self levelling and reversible for left and right handed operation. Acoustically designed, it features a silicon gasket for medium temperature smoke and fire door applications. Doubles as a kick plate when semi-morticed. Operated automatically by pressure against the door jamb or stop on its adjustable brass strike.

Location: Face mounted or semi-morticed into bottom of single and double butt hinged doors. For semi-mortice minimum door thickness of 50mm for rebated meeting stiles and 40mm for plain meeting stiles is required. Can be face mounted to the bottom of metal doors.
Min/Max Gap: 3mm to 13mm.
Fixing: Satin clear (silver).
Fixing: Screw fix. Colour matched escutcheon plates and zinc plated, cross recess head S.T. screws supplied.   
Seal: Grey Silicon Rubber.
Sizes: 1500mm, 1220mm, 1070mm, 920mm, 610mm, 450mm to 300mm (min). Seals can be cut back to exact size.

Features

  • Cert. GVYI.R37913
  • Acoustic: AUS/NZ: NCC Spec. F5.5. UK/EU: Approved Document E. Rated to BS EN ISO 717.1.
  • Fire: AUS/NZ: NCC Spec. C3.4. AS1530.4 & AS/NZS 1905.1. NZ BC Compliance Doc. C/AS1 6.19.2 & App. C6.1.1. UK/EU: Approved Document B. BS 476 Pt. 20 & 22 (similar to BS EN 1634-1).
  • FRL & FRR-/240/60 and FD240.
  • Gasket flammability index 1 when tested to AS1530.2.
  • Smoke: NCC Spec. C3.4. AS1530.7 & BS EN 1634-3. Meets smoke leakage rates specified in AS6905 & EN 13501-2 “Sa”, “Sm”.
  • Energy: NCC Pt. 3.12.3.3 & J3.4.
  • Design for Access and Mobility
  • High efficiency mechanism to assist with the closing force requirements detailed in AS1428.1.
  • Durability: Tested to over 1,000,000 operating cycles without failure.
  • Patented, Registered Design.

Finishes

  • SAA

Heavy Duty Automatic Door Bottom Seal – Satin Anodised Aluminium
Satin Anodised Aluminium
Product code: FS5301
£58.30
Each
Heavy Duty Automatic Door Bottom Seal – Satin Anodised Aluminium
Satin Anodised Aluminium
Product code: FS5302
£67.60
Each
Heavy Duty Automatic Door Bottom Seal – Satin Anodised Aluminium
Satin Anodised Aluminium
Product code: FS5303
£85.75
Each
Heavy Duty Automatic Door Bottom Seal – Satin Anodised Aluminium
Satin Anodised Aluminium
Product code: FS5304
£95.15
Each
Heavy Duty Automatic Door Bottom Seal – Satin Anodised Aluminium
Satin Anodised Aluminium
Product code: FS5305
£106.32
Each
Heavy Duty Automatic Door Bottom Seal – Satin Anodised Aluminium
Satin Anodised Aluminium
Product code: FS5306
£124.80
Each
Related Products
Leave a Review
Copyright © 2021 Poole Waite & Co. Ltd.